EZCURB™ SYSTEM
SPECCO Industries' BRAND NEW EZCURB™ SYSTEM allows landscapers to create beautiful durable curbs fast and easy.
Our system is comprised of the best products SPECCO has to offer for curbing contractors that make getting a high quality finish done fast and easy.
5 Step Curbing System:
- ADMIXTURE
- INTEGRAL COLOR PACKS
- EVAPORATION RETARDANT & FINISHING AID
- LIQUID OR POWDER ACCENT RELEASE
- HIGH SOLIDS SATIN or GLOSS FINISH SEALER
- BLUSHING REMOVAL (if needed)
ADMIXTURE
EZCURB™ ADMIXTURE
EZCURB™ ADMIXTURE is a blend of a neutral, biodegradable, viscosity modifier and lubricating liquid additives designed to prevent and reduce bleeding segregation, shrinkage and cracking that may occur in low slump concrete curb mixes.
It provides higher strengths with increased durability. It’s hygroscopic gelling action holds moisture, prevents migration of free water to the surface, and provides creaminess and uniformity to the concrete mix.
It makes it much easier to form and place and extrude the concrete curb mix, and provides a smooth, densified surface.
EZCURB™ INTEGRAL COLORS
EZ Curb Integral colors packs are easily mixed into the concrete transforming your curb into an evenly colored finished product to enhance appearance around the home. These integral colors are strong durable and will last as long as the finished curb. Installation is cleaner and easier than shake on hardener and require far less labor.
There are bold and intense premium colors as well as standard colors that make an attractive upgrade for any project. Our packs are pre-measured and easily added to your ½ batch mix, with self-dissolving paper.
SURFACE TREATMENT
EZCURB™ SURFACE TREATMENT
EZCURB™ SYSTEM: Surface Treatment is a moisture evaporation reducer designed to help produce quality concrete flatwork by combating rapid drying conditions caused by high heat, strong winds, low humidity, direct sunlight, and the use of accelerators in the mix.
It forms a lubricating gelled surface film which reduces plastic shrinkage cracking and wind crusting and allows the surface to remain plastic for an extended finishing time.
It can be used effectively on both air-entrained and non-air entrained concrete flatwork, and concrete mixes containing silica fume, fly ash, and latex modified concrete, concrete toppings or hardeners, stamped decorative concrete, as well as on stucco or plaster.
DECORATIVE COATINGS
EZCURB™ CURB RELEASE POWDER
EZCURB™ CURB RELEASE POWDER is a blend of fine pigments and water repelling additives designed to prevent freshly placed concrete from adhering to curbing stamping mats and texture rollers.
Transfers the details of your stamping mats or texture rollers to freshly placed concrete in matching or contrasting colors.
CURB RELEASE POWDERS are available in 8 standards antiquing colors. They can be used on plain or integrally colored concrete curbs
EZCURB™ CURB RELEASE LIQUID
EZCURB™ CURB RELEASE LIQUID is a specially formulated colorless bond breaker designed to prevent freshly placed concrete curbs from adhering to texturing mats or texture rollers.
It forms a lubricating barrier that prevents sticking, build up, and friction between the texturing mats or rollers and the freshly placed concrete. To create dual tones antiquing accents, you may blend Curb Release Powder into the Curb Release Liquid at small, varying doses to create the desired contrast.
SEALERS
EZCURB™ SATIN FINISH SEALER
EZCURB™ SATIN FINISH SEALER is a high solid, clear solvent-based acrylic copolymer curing sealer, to harden and protect freshly placed concrete curbs.
It forms an impervious film that is resistant to the alkali present in freshly placed curbs and retains moisture to ensure proper strength development.
It provides a long-lasting protective SATIN finish anti-fungal membrane on the surface of the curb.
EZCURB™ GLOSS FINISH SEALER
EZCURB™ GLOSS FINISH is a high solid, clear solvent-based acrylic copolymer curing sealer, to harden and protect freshly placed concrete curbs.
It forms an impervious film that is resistant to the alkali present in freshly placed curbs and retains moisture to ensure proper strength development.
It provides a long-lasting protective GLOSS finish anti-fungal membrane on the surface of the curb.
CLEANERS
EZCURB™ CURB CLEANER
EZCURB™ CURB CLEANER is a blend of solvents used to lower the viscosity of sealers and dissipate blushing due to excessive moisture. It can
also be used to clean rollers, mixing tools, or sprayers and related equipment after use.
CURB CLEANER is an excellent “solvent
wash” remedy on high solids acrylic sealers that exhibit significant degrees of blushing or water whitening from moisture trapped
within the film.