B-41 Resolve

Blend of Xylene and Aromatic 100 solvents for use as a thinner, cleaning solvent, or acrylic sealer reactivator and surface conditioner.


Specco B-41 Re-Solve is a blend of Xylene solvents that may be used to lower the viscosity of epoxies, paints and sealers. B-41 ReSolve can also be used to clean rollers, mixing, or sprayers and related equipment after use. B-41 Re-Solve is commonly used as a “solvent wash” remedy on high solids acrylic cure and seal film forming products that have exhibited significant degrees of blushing or water whitening from moisture trapped within the film. B-41 Re-Solve may also be used to help remove stubborn stains or deposits like grease, oil and related hydrocarbons from concrete if traditional degreasers or cleaners do not perform adequately.


  • Restores original sheen to old, acrylic resin based coatings.
  • Removes trapped moisture (surface blushing) from film.
  • Revitalizes & brightens without removing old sealer.
  • Multi-use thinning & cleaning solvent.

PACKAGING: 1 gallon (4 gallon cans / case), 5 gallon and 55 gallon containers