Odorless solvent based, ready to use, chemically reactive form oil designed specifically for plastic or fiberglass molds. VOC<250 g/L
CONCRETE FORM RELEASE AGENT
MSP “Odorless” Release Oil is a highly effective petroleum based release compound recommended for use on plastic, fiberglass, or ABS based molds. MSP “Odorless” Release Oil contains a chemically reactive base that upon contact with cement alkalinity creates a water-insoluble film on the form’s surface that prevents adhesion or sticking of the cast concrete. Surface voids and related defects are reduced as the film formation helps promote displacement of trapped air. MSP “Odorless” Release Oil is non-staining and safe to use on white or colored concrete to obtain an architectural grade concrete surface. MSP “Odorless” Release Oil will not transfer or initiate adverse inter-coat adhesion of subsequent applied coatings, caulks, or sealants. Concrete form surfaces are left free of any residual contaminant build-up, which allows easier cleaning and stripping properties and extends form life.
- V.O.C. compliant in most states
- Odorless formulation allows a more user friendly work environment
- Low solvency prevents any warpage or damage to various mold substrates providing longer mold life
- Leaves no film or residual build-up
- Eliminates surface voids
COMPOSITION: Proprietary blend of oils, surface acting chemicals and rust inhibitors in a hydrocarbon solution.
VOC COMPLIANCE: MSP “Odorless” Release Oil is VOC compliant product safe to use in all states with the exception of California (CARB and SCAQMD). It contains less than 250 g/L (2.08 lb. /gal.) volatile organic compounds which meets existing form release agent VOC (VOM) regulations under the EPA’s National AIM (Architectural and Industrial Maintenance) listings for all states including OTC and LADCO region states.
SHIPPING NAMES: If over 119 gallon single container (tote): NA 1993, Combustible Liquid, N.O.S., Hazard Class Combustible, PGIII, (Compounded Lubricating Oil). Not regulated and no placards required if shipping container is less than 119 gallons capacity. For Combustible Liquid Exemption, refer to CFR 49,173.150 paragraph H.
SHIPPING CLASS: ITEM 155250, SUB 2, LTL 65-CONCRETE RELEASE AGENT
AVAILABLE IN: 1 gallon (3.78 L), 5 gallon (18.9 L) pails, 55 gallon (208 L) drums, 265 gallon (1000 L) containers