Blend of petroleum oils, surfactants, and amines for most all mold types except latex or foam after dilution with water or alcohol/water.
WATER DILUTABLE FORM RELEASE AGENT
F-50 Enviro Form Release is a concentrated, emulsifiable base oil that can be diluted on site with potable water to produce a combination physical and chemical, V.O.C. compliant, form release agent. Once diluted, the F-50 release will not transfer or stain the cast surface, which allows the hardened concrete to accept coatings, paints, or caulks without any inter-coat adhesion problems.The final concrete may be painted with latex or oil based paints or coatings without any detrimental loss of bond. This makes the F-50 Enviro Concentrate an ideal choice for precast concrete panel production.F-50 Enviro Concentrate is safe to use on steel, plywood, aluminum fiberglass, ABS, urethane, and plastic molds or form liners.
BENEFITS:
- Cost effective concentrate reduces freight & transportation costs.
- Environmentally safe.
- Water dilutable.
- Non-staining.
- Non-corrosive.
- Odorless.
- Minimizes surface defects and voids (bugholes).
COMPOSITION: Blend of emulsified petroleum oil, synthetic surfactants and fatty acids. Does not require reporting under SARA 313 (Community Right to Know).
VOC COMPLIANCE: F-50 Enviro contains less than 250 g/L (2.08 lb. /gal.) volatile organic compounds. Meets existing form release agent VOC (VOM) regulations under the EPA’s National AIM (Architectural and Industrial Maintenance) listings for all states including OTC, LADCO, CARB, and SCAQMD.
SHIPPING NAME: COMPOUNDED PETROLUEM OIL
SHIPPING CLASS: ITEM 33880, SUB 2, LTL 55
AVAILABLE IN: 5 gallon (18.9 L) pails, 55 gallon (208 L) drums, 265 gallon (1000 L) containers
