CONCRETE CURE & SEAL COMPOUND WATER BASED - SEMI-GLOSS SHEEN
Envirocure 1315 is a water base, film forming, cure and seal compound that is used to cure freshly placed concrete and seal existing concrete surfaces. Envirocure 1315 may be used on plain or colored, exterior or interior concrete and masonry surfaces. Envirocure 1315 allows the concrete surface to develop full design strength by promoting complete hydration during the curing process. Envirocure 1315 increases resistance to freeze/thaw cycling, deicer salts, and other chemicals, while also improving abrasion resistance. This eliminates potential dusting and allows easier cleaning and maintenance. Envirocure 1315 can be used as a cost effective primer for subsequent applied paints to improve their coverage rate and bond.
- V.O.C compliant
- Complies with ASTM C-1315 Type 1, A or B
- Non-yellowing (UV resistant) film
- Ideal for cost effective dust-proofing
- Will not darken concrete color
- Provides a semi-gloss sheen
- Safe to use indoors – virtually no odor
COMPOSITION: Water base copolymer acrylic. Contains no solvents, waxes or silicones.
TECHNICAL DATA: Envirocure 1315 is a film forming, acrylic emulsion that provides a medium (satin) surface sheen with slight substrate darkening. The cured film is breathable, flexible, will not support mold growth, and will not discolor or yellow from UV exposure. Envirocure 1315 is formulated to comply with: ASTM C309 Type 1 Class B and ASTM C1315, Type 1, Class A cure and seal specifications. Contains less than 250 g/L (2.08 lbs. /gal.) volatile organic compounds. Meets Architectural Coatings Section 183(e) Final Rule Limit for concrete curing compounds
SHIPPING NAME: Concrete Cure & Seal Compound – Water base - Not regulated.
FREIGHT CLASS: ITEM 33880, SUB 2, LTL 55
AVAILABLE IN: 1 gallon (3.78 L), 5 gallon (18.9 L), and 55 gallon (208 L) containers.