Product Search

Solvent based pure acrylic resin for curing and sealing decorative "stamped" concrete.  Complies with ASTM C-1315 Tupe 1, Class A specifications.  Provides a very durable, high gloss sheen.  VOC 700 g/L.  This product is not for sale or use in the O.T.C. region states or the state of California due to current EPA .40 CFR regulations for Concrete Cure and Seal Compounds.


Stampsheen is a clear acrylic copolymer, solvent-based, curing, sealing, and hardening compound for decorative “texture stamped” concrete or thinset stamped overlayments. Stampsheen will form an impervious film that is resistant to the alkali present in cement, and will retain moisture for freshly placed concrete ensuring proper strength development. Stampsheen provides a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Stampsheen will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear. Stampsheen is also ideal for use on “dry shake” colored concrete, acid stained concrete, as well as decorative precast concrete such as table or counter tops.


  • Provides high gloss “wet look” sheen
  • Highlights and enhances the concrete color tones
  • Hardens new concrete by providing proper cure
  • Provides “anti-spall” protection against salt attack
  • Non-yellowing formula designed for maximum resistance against sun degradation
  • Durable film with excellent gloss retention

SPECIFICATIONS/COMPLIANCE'S: Specco Stampsheen is formulated to comply with: ASTM C-309, Type I, ASTM C-1315, Type I, Class A, and ASTM C-156-71. Contains less than 700 g/L (5.80 lbs. /gal.) volatile organic compounds. This product meets the Architectural Coatings requirements in accordance with EPA 40 CFR Part 59 Table 1 Subpart D for Concrete Curing and Sealing Compounds with a maximum V.O.C. Content of 5.83 lb. / gal. (700 g/L). Does not comply with the O.T.C. states reduced (350 g/L) compliance requirement, thereby excluding California, Connecticut, Delaware, District of Columbia, Illinois, Maine, Maryland, Massachusetts, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, and Virginia.

SHIPPING NAMES: Combustible Liquid N.O.S., (Light Aromatic Naphtha, 1, 2, 4-Trimethylbenzene) NA 1993, Packing Group III. Note- Not regulated by D.O.T. in containers < 119 gallons. For combustible liquid exemption refer to CFR 49, 173.150, par. H.

SHIPPING CLASS: ITEM 155250, SUB 2, LTL 65- Concrete Cure & Seal Compoun

AVAILABLE IN:  1 gallon (3.78 L), 5 gallon (18.9 L), and 55 gallon (208 L) containers.


Available info for Stampsheen:
Tech Data MSDS

Tech Data



A Complete Line of
Quality Products for Concrete
and Masonry since 1972

601 North 5th Avenue
Kankakee, IL 60901


For product or general inquiries:

(630) 257-5060         FAX: (630) 257-9006

Corporate Address

601 North 5th Ave.

Kankakee, IL 60901