HIGH GLOSS CURE AND SEAL COMPOUND FOR STAMPED CONCRETE
Stampsheen 350 is a clear acrylic copolymer, solvent-based, curing, sealing, and hardening compound for decorative “texture stamped” concrete or thinset stamped overlayments. Stampsheen 350 will form an impervious film that is resistant to the alkali present in fresh cement, and will retain moisture for freshly placed concrete ensuring proper strength development. Stampsheen 350 will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. Stampsheen 350 will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear. Stampsheen 350 is also ideal for use on “dry shake” colored concrete, stained or dyed concrete, as well as decorative precast concrete such as table or counter tops.
- Formulated at reduced V.O.C. levels for use in the O.T.C. region states
- Provides a “wet look” sheen with excellent gloss retention
- Non-yellowing formula designed for maximum resistance against sun degradation
- Highlights and enhances the concrete color tones
- Hardens new concrete by providing proper cure
- Provides “anti-spall” protection against salt attack
SPECIFICATIONS/COMPLIANCE'S: Stampsheen 350 is formulated to comply with: ASTM C-309 Type I, Class A&B, ASTM C-1315 Type I, Class A and ASTM C-156- 71. Stampsheen 350 contains less than 350 g/L (2.92 lbs. /gal.) volatile organic compounds and meets the Architectural Coatings requirements in accordance with EPA 40 CFR Part 59 Table 1 Subpart D for Concrete Curing and Sealing Compounds. Stampsheen 350 complies with most O.T.C. region states, as well as current National AIM reduced (350 g/L) VOC compliance requirements for all states excluding California
SHIPPING NAMES: UN 1866, Resin Solution, Flammable, 3,PGIII
SHIPPING CLASS: ITEM 155250, SUB 2, LTL 65
AVAILABLE IN: 1 gallon (3.78 L), 5 gallon (18.9 L), and 55 gallon (208 L) containers.