fbpx

Cure & Seal 350

TDS DOWNLOAD
SDS DOWNLOAD

Solvent based, low viscosity, copolymer acrylic resin for curing and sealing concrete.  Complies with ASTM C-1315 Type 1, Class B specifications.  Provides a satin sheen.  VOC 700 g/L.  This product is not for sale or use in the O.T.C. region states or the state of California due to current EPA .40 CFR regulations for Concrete Cure and Seal Compounds.

CURING & SEALING COMPOUND – SATIN SHEEN

C-15 is a clear acrylic copolymer, solvent-based, curing, sealing, hardening and dust-proofing compound for interior (see cautions) and exterior concrete. C-15 will form an impervious film that is resistant to the alkali present in fresh cement, and will retain moisture for freshly placed concrete ensuring proper strength development. C-15 will penetrate the substrate and provide a protective seal on the surface that is resistant to mild acid, alkali, and salt attack, and will not support mold growth. C-15 will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear.

BENEFITS:

  • Formulated at reduced V.O.C. levels for use in the O.T.C. region states.
  • Contains an internal flattening agent that provides a matt (low sheen) finish.
  • Hardens and dust proofs new concrete by providing proper cure.
  • Provides anti-spall protection against salt attack.
  • Non-yellowing acrylic composition provides improved resistance against sun (U.V.) degradation.

SPECIFICATIONS/COMPLIANCE’S: Cure & Seal 350 is formulated to comply with: ASTM C-309 Type I, Class A&B, ASTM C-1315 Type I, Class A and ASTM C- 156-71. Cure & Seal 350 contains less than 350 g/L (2.92 lbs. /gal.) volatile organic compounds and meets the Architectural Coatings requirements in accordance with EPA 40 CFR Part 59 Table 1 Subpart D for Concrete Curing and Sealing Compounds. Cure & Seal 350 complies with most O.T.C. region states as well as current National AIM reduced (350 g/L) VOC compliance requirements for all states excluding California.

SHIPPING NAMES: UN 1866, Resin Solution, Flammable, 3, PGIII

SHIPPING CLASS: ITEM 155250, SUB 2, LTL 65 

AVAILABLE IN:  1 gallon (3.78 L), 5 gallon (18.9 L), and 55 gallon (208 L) containers.