A ready to use, solvent-free, chemically active release agent
Ideal for environmental applications
Green EZ™ F-100 Bio-Release is a ready to use, solvent-free, chemically active release agent designed for applications where solvent or petroleum oil-based releases are not permitted. Ideal for environmental applications since it eliminates any risk of possible ground or water reservoir contamination resulting from over-spray or runoff. In addition, any stripped precast, or waste concrete is hydrocarbon-free and will not contaminate or jeopardize soil integrity. Green EZ™ F-100 Bio-Release will not transfer and allows hardened concrete to accept coatings, paints, or caulks without inter-coat adhesion problems. Produces a smooth, void-free, architectural concrete surface. Green EZ™ F-100 Bio-Release is recommended and safe to use on steel, plywood, aluminum, fiberglass, plastic, and ABS forms.
BENEFITS:
- V.O.C. compliant in all states
- Biodegradable environmentally safe composition
- Sprayable in cold temperatures
- Non-staining
- Minimizes surface defects and voids (bug-holes)
- Prevents build-up
- Ideal for indoor or outdoor concrete forming applications
COMPOSITION: Proprietary Blend of modified triglycerides (vegetable) oils. Does not require any reporting under SARA 313 (Community Right to Know).
DIRECTIONS FOR USE: Form surfaces should be dry and free from any existing concrete build-up before applying Green EZ™ F-100 Bio-Release. Specco suggests that the application is made using a conventional sprayer or by hand wiping with rollers, mops, or rags. Application rates will vary depending on the type of form and application method. For new wooden forms, the recommended application rate is 400-500 square feet per gallon, while for used or seasoned wooden forms, apply at a higher rate of 700-800 square feet per gallon.
COMPOSITION: Proprietary Blend of modified triglycerides (vegetable) oils. Does not require any reporting under SARA 313 (Community Right to Know).