A-10C Accelerator
- Details
- Category: CONCRETE ACCELERATORS

Chloride based accelerating liquid. Complies with ASTM C-494 Type C specifications.
Chloride based accelerating liquid. Complies with ASTM C-494 Type C specifications.
Concentrated, aluminum sulfate solution designed to accelerate the set of pneumatically placed concrete (shotcrete).
Cost effective, non-chloride accelerating and water reducing liquid. Complies with ASTM C-494 Type E specifications.
Non-chloride accelerating and water reducing liquid. Complies with ASTM C-494 Type E specifications.
Chloride based accelerating liquid.
Non-chloride accelerating liquid.
Pre-weighed, non-chloride based accelerating powder
Pre-weighed, chloride based accelerating powder
Air entraining, water reducing, viscosity modifying combination designed specifically for use with volumetric (auger style) mixers.
Traditional (vinsol resin) based. Complies with ASTM C-260 specifications.
Synthetic (sulfonate) based. Complies with ASTM C-260 specifications.
High range water reducing plasticizer with added wetting agents for improved surface detail of dry cast concrete production.
Viscosity modified lubricating additive for use with semi dry or extruded mixes to improve hydration and placement.
Concrete pumping aid and pump line priming liquid.
Viscosity modified integral retarder for hot weather applications or delay of final set time. Complies with ASTM C-494 Type B specifications.
SRA-100 is a specialty liquid admixture specifically formulated to reduce drying shrinkage in concrete mix designs.
White, high range powder, melamine based, ideal for white cement mixes.
Carboxylated type for high flow and high water reduction with improved bleed water control. Complies with ASTM C-494 Type F specifications.
Multi-component plasticizing liquid for improved surface detail, strength, and workability. Complies with ASTM C-494 Type F specifications.
Liquid V.M.A. for improved mortar workability, bond and tooling properties in hot weather.
Liquid V.M.A. for multiple use applications, such as bleed water and shrinkage control, or as a hydration aid for shotcrete.
Liquid V.M.A. for multiple use applications as mentioned above, modified for increased strength gain and improved surface detail.
Low range water reducer with added viscosity modifier designed specifically for volumetric (auger style) mixers. Complies with ASTM C-494 Type A specifications.
Powdered, low range lignosulfonate based water reducer with low sugar for minimal set retardation. Complies with ASTM-C494 Type A specifications.
Cost effective water reducing plasticizer provides an ideal balance of flowability and surface appearance. Complies with ASTM C-494 Type F specifications
Integral water repellent liquid to decrease water absorption in precast mixes or in masonry mortar applications.
Corporate Address
601 North 5th Ave.
Kankakee, IL 60901